|
|
|
National Stock Number:
5305-01-104-7313
Federal Supply Class:
5305
National Item Identification Number:
011047313
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 11438307-105 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 11438307-5 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | FRSS7500-8-B-4 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FRSS7500-8-B-4DL | 17446 | HUCK INTERNATIONAL, INC | | FT1300-8-2-4DL | 58794 | FASTENER TECHNOLOGY CORP | | FRSS7500-8-B-4 | 97928 | HUCK INTL INC | | S-1051 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.550 INCHES MINIMUM AND | | 0.590 INCHES MAXIMUM | | FASTENER LENGTH | 1.045 INCHES MINIMUM AND | | 1.085 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 HEAD | | STEEL COMP 301 PRIMARY WASHER | | STEEL COMP 302 SPRING | | STEEL COMP 304 STAND-OFF | | STEEL COMP 303 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD | | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER | | QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING | | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | SURFACE TREATMENT | ANODIZE HEAD | | PASSIVATE PRIMARY WASHER | | PASSIVATE SPRING | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.420 INCHES NOMINAL | | HEAD HEIGHT | 0.495 INCHES NOMINAL | | MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | SPECIAL FEATURES | STRAIGHT KNURLED |
|
|