|
|
|
National Stock Number:
5305-01-102-7348
Federal Supply Class:
5305
National Item Identification Number:
011027348
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 1142AS441-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | DCT7900-10-C-3 | 0HDW7 | HUCK INTERNATIONAL, INC. | | DCT7900-10-C-3 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.235 INCHES MINIMUM AND | | 0.265 INCHES MAXIMUM | | FASTENER LENGTH | 0.520 INCHES MINIMUM AND | | 0.550 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 384 OR | | STEEL COMP 385 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND | | 0.380 INCHES MAXIMUM | | HEAD HEIGHT | 0.090 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.126 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM |
|
|