5305-01-085-7015, SCREW,EXTERNALLY RELIEVED BODY

5905-01-085-7013 RESISTOR,FIXED,COMPOSITION

National Stock Number:
5305-01-085-7015

Federal Supply Class:
5305

National Item Identification Number:
010857015

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

4075-M07-F15	04729	UNICORP.
5165238	04729	UNICORP.
5839-SS-3118-6	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
5165238	1YGB8	CAREY MANUFACTURING CO, INC
5165238	53711	NAVAL SEA SYSTEMS COMMAND
5165238	56232	LOCKHEED MARTIN CORPORATION
6119-SS-3118	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6119-SS-3118-6	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6119-SS-3118-6B	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
6119-SS-3118-6B	1YGB8	CAREY MANUFACTURING CO, INC
6119-SS-3118	1YGB8	CAREY MANUFACTURING CO, INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
FIRST DIAMETER FROM HEAD	0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD DIAMETER	0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD HEIGHT	0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764,CLASS 7,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.312 INCHES
POINT CHAMFER ANGLE	85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
POINT DIAMETER	0.214 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
POINT LENGTH	0.250 INCHES NOMINAL
POINT STYLE	CONE
SPECIFICATION/STANDARD DATA	53711-5165238 MANUFACTURERS SPECIFICATION CONTROL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	OXIDE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial