| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 0.502 INCHES MINIMUM AND |
| 0.542 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 6061 HEAD |
| STEEL COMP 301 PRIMARY WASHER |
| STEEL COMP 302 SPRING |
| ALUMINUM ALLOY 6061 STAND-OFF |
| STEEL COMP 302 OR |
| STEEL COMP 304 OR |
| STEEL COMP 305 OR |
| STEEL COMP 316 OR |
| STEEL COMP 321 OR |
| STEEL COMP 347 OR |
| STEEL COMP 384 OR |
| STEEL COMP 385 FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD |
| MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING |
| QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER |
| SURFACE TREATMENT | ANODIZE HEAD |
| PASSIVATE PRIMARY WASHER |
| PASSIVATE SPRING |
| ANODIZE STAND-OFF |
| PASSIVATE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TY1 CL1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| MIL-A-8625 TY1 CL1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| HEAD STYLE | KNURLED NO. 3 |
| HEAD DIAMETER | 0.436 INCHES MINIMUM AND |
| 0.466 INCHES MAXIMUM |
| HEAD HEIGHT | 0.275 INCHES MINIMUM AND |
| 0.305 INCHES MAXIMUM |
| MATERIAL ACCOMMODATED THICKNESS | 0.156 INCHES MINIMUM AND |
| 0.217 INCHES MAXIMUM |
| SPECIAL FEATURES | FURNISHED WITH TWO WASHERS 0.020 IN MIN AND 0.030 IN MAX THK,0.256 IN MIN AND 0.261 IN MAX ID,0.405 IN MIN AND 0.425 IN MAX OD |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 0HDW7 |
| DESIGN CONTROL REFERENCE | F7500-10-D-3 |