|
|
|
National Stock Number:
5305-01-068-5510
Federal Supply Class:
5305
National Item Identification Number:
010685510
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 5175178-001 | 53711 | NAVAL SEA SYSTEMS COMMAND | | CA13070 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | DJR7900-6C750 | 17446 | HUCK INTERNATIONAL, INC | | CA13070 | 58794 | FASTENER TECHNOLOGY CORP | | CA13070 | D0680 | FAIRCHILD FASTENERS EUROPE CAMLOC GMBH | | CA13070 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | DJR7900-6C750 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.600 INCHES MINIMUM | | FASTENER LENGTH | 0.735 INCHES MINIMUM AND | | 0.765 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 PRIMARY WASHER | | STEEL COMP 303 OR | | STEEL COMP 304 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 384 OR | | STEEL COMP 385 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER | | ASTM A581 ASSN STD 1ST MATERIAL RESPONSE OR | | QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE STAND-OFF | | ASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | PASSIVATE PRIMARY WASHER | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.270 INCHES MINIMUM AND | | 0.290 INCHES MAXIMUM | | HEAD HEIGHT | 0.250 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.140 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM |
|
|