|
|
|
National Stock Number:
5305-01-051-1761
Federal Supply Class:
5305
National Item Identification Number:
010511761
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121754-6-18 | 56878 | SPS TECHNOLOGIES, LLC | | 121754-6-18 | 80539 | SPS TECHNOLOGIES, LLC | | AIC9535-6-18 | 06725 | SPS TECHNOLOGIES, LLC | | C9535-6-18 | 06725 | SPS TECHNOLOGIES, LLC | | PBF1198-6-18 | 27624 | SPS TECHNOLOGIES LLC | | C9535-6-18 | 81755 | LOCKHEED MARTIN CORPORATION | | SC1776-6-18 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VT1696-6-18 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.555 INCHES MINIMUM AND | | 0.585 INCHES MAXIMUM | | FASTENER LENGTH | 1.670 INCHES MINIMUM AND | | 1.720 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.515 INCHES MINIMUM AND | | 0.535 INCHES MAXIMUM | | HEAD HEIGHT | 0.167 INCHES NOMINAL | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 1.115 INCHES MINIMUM AND | | 1.135 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | SPECIAL FEATURES | BEARING SURFACE OF HEAD TO BE 99.0 DEGREE TO 101.0 DEGREE INCLUDED ANGLE AND BY 0.075 IN. LONG | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 92215 | | DESIGN CONTROL REFERENCE | VT1696-6-18 |
|
|