5305-01-048-5365, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-048-5365

Federal Supply Class:
5305

National Item Identification Number:
010485365

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

51B223-6	06725	SPS TECHNOLOGIES, LLC
51B223-6	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
51B223-6	0JRC1	NORTHROP GRUMMAN TECHNICAL SERVICES, INC.
51B223-6	27624	SPS TECHNOLOGIES LLC
51B223-6	56878	SPS TECHNOLOGIES, LLC
51B223-6	73197	HI-SHEAR CORPORATION
51B223-6	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION
51B223-6	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

FASTENER LENGTH	0.735 INCHES MINIMUM AND 0.782 INCHES MAXIMUM
GRIP LENGTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.568 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
HEAD HEIGHT	0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC 1ST TREATMENT RESPONSE OR NAS 672 ASSN STD 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OR CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.345 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial