|
|
|
National Stock Number:
5305-01-043-1880
Federal Supply Class:
5305
National Item Identification Number:
010431880
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BM19045-4-14A | 97928 | HUCK INTL INC | | GB510FG4-14 | 06710 | VALLEY-TODECO, INC. | | GB510FG4-14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510N4A14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB510FG4-14 | 27624 | SPS TECHNOLOGIES LLC | | GB510FG4-14 | 80539 | SPS TECHNOLOGIES, LLC | | SFH22D4A14 | 56878 | SPS TECHNOLOGIES, LLC | | HT326-4A14 | 73197 | HI-SHEAR CORPORATION | | SFH22D4A14 | 80539 | SPS TECHNOLOGIES, LLC | | HT8181F4-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.267 INCHES MINIMUM AND | | 0.334 INCHES MAXIMUM | | FASTENER LENGTH | 1.152 INCHES MINIMUM AND | | 1.199 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR | | MIL-C-8837 TY 2 CL 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.447 INCHES MINIMUM AND | | 0.507 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.865 INCHES MINIMUM AND | | 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND | | 0.2492 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SPECIFICATION/STANDARD DATA | 26512-GB510N MANUFACTURERS STANDARD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|