|
|
|
National Stock Number:
5305-01-019-4301
Federal Supply Class:
5305
National Item Identification Number:
010194301
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 6150-SS-2520 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6150-SS-2520 | 1YGB8 | CAREY MANUFACTURING CO, INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.359 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | FASTENER LENGTH | 1.046 INCHES MINIMUM AND | | 1.078 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | KNURLED NO. 1 | | HEAD DIAMETER | 0.557 INCHES MINIMUM AND | | 0.567 INCHES MAXIMUM | | HEAD HEIGHT | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.170 INCHES MINIMUM AND | | 0.180 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.655 INCHES MINIMUM AND | | 0.719 INCHES MAXIMUM |
|
|