|
|
|
National Stock Number:
5305-01-018-8910
Federal Supply Class:
5305
National Item Identification Number:
010188910
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| ASP-GN-8 | 99017 | CAPLUGS LLC DBA MOKON DIV CAPLUGS | | GS10414-7 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.201 INCHES NOMINAL | | FASTENER LENGTH | 0.700 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 155000 POUNDS PER SQUARE INCH | | HEAD STYLE | UNDERCUT UNIVERSAL | | HEAD DIAMETER | 0.218 INCHES MINIMUM AND | | 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.134 INCHES MINIMUM AND | | 0.138 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.1094 INCHES MINIMUM AND | | 0.1111 INCHES MAXIMUM | | POINT STYLE | CONE | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.098 INCHES MINIMUM AND | | 0.103 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.499 INCHES MINIMUM AND | | 0.549 INCHES MAXIMUM |
|
|