5305-00-991-9044, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-991-9044

Federal Supply Class:
5305

National Item Identification Number:
009919044

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

2064187	06641	CENTURY FASTENERS CORP.
2064187	28527	L3HARRIS TECHNOLOGIES, INC.
2064187G001	28527	L3HARRIS TECHNOLOGIES, INC.
2064187	95750	AIRCO REPUBLIC ELECTRONICS, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	4.020 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.313 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	0.433 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER	4.140 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.260 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	3
FASTENER LENGTH	4.730 INCHES NOMINAL
FIFTH DIAMETER FROM HEAD	0.281 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.187 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD	0.138 INCHES MINIMUM AND 0.144 INCHES MAXIMUM
HEAD DIAMETER	0.281 INCHES NOMINAL
HEAD HEIGHT	0.250 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SECOND DIAMETER FROM HEAD	0.147 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	A1049436 FSCM 90348 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THIRD DIAMETER FROM HEAD	0.187 INCHES NOMINAL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.590 INCHES MINIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial