|
|
|
National Stock Number:
5305-00-926-1826
Federal Supply Class:
5305
National Item Identification Number:
009261826
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 13207E6761FN3 | 97403 | CECOM LR CENTER | | 5305009261826 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | AES01F750B75AW9A91 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | ASME B18.2.1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | AS60-12-22 | 83445 | AEROL LLC | | 5305PL0943239 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | B1821BH075F275N | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35304-190 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90726-190 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90727-190 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 2.750 INCHES NOMINAL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A354, GR BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP M1020 OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | WIDTH BETWEEN FLATS | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC AND CHROMATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.750 INCHES MINIMUM AND 1.938 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES DESIGNATOR | UNF |
|
|