|
|
|
National Stock Number:
5305-00-921-0929
Federal Supply Class:
5305
National Item Identification Number:
009210929
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| AES01F250750AW9A87 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | ASME B18.2.1 | 05047 | THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS | | MS18153-6 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | MS18153-6 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.062 INCHES NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.613 INCHES MINIMUM AND 0.644 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 | | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
|
|