5305-00-914-3786, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-00-914-3786

Federal Supply Class:
5305

National Item Identification Number:
009143786

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

4F10030-20R	96105	FUNK MFG CO SUB OF DEERE AND CO
5305009143786	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
AES01C375A25AW9A97	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
ASME-B18.2.1	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
B1821BH038C125D	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
5305009143786	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
MS18154-61	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51095-361	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	1.210 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.062 INCHES NOMINAL
HOLE TYPE	DRILLED
HOLE QUANTITY	1
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM YIELD STRENGTH	120000 POUNDS PER SQUARE INCH
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SPECIFICATION/STANDARD DATA	05047-AES01C375A25AW9A97 NATIONAL STD/SPEC
WIDTH BETWEEN FLATS	0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ZINC AND CHROMATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.000 INCHES MINIMUM AND 1.188 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	16

Click here to Register for Free 30-day Trial