|
|
|
National Stock Number:
5305-00-904-7429
Federal Supply Class:
5305
National Item Identification Number:
009047429
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 1202987-2 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 1202987-2 | 96774 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.156 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.027 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 0.281 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.112 INCHES NOMINAL | | HEAD DIAMETER | 0.175 INCHES NOMINAL | | HEAD HEIGHT | 0.090 INCHES NOMINAL | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 316 OVERALL | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | SECOND DIAMETER FROM HEAD | 0.072 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.125 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 48 | | THREAD SERIES DESIGNATOR | UNF |
|
|