5305-00-862-1999 SCREW Index 5305-00-862-2001 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-862-2000

Federal Supply Class:
5305

National Item Identification Number:
008622000

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
546-8188-00313499ROCKWELL COLLINS, INC.


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.294 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER1.794 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER1.856 INCHES NOMINAL
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY3
FASTENER LENGTH2.294 INCHES NOMINAL
FIRST DIAMETER FROM HEAD0.115 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
HEAD DIAMETER0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM
HEAD STYLEOVAL COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIALSTEEL COMP 430 OVERALL
NOMINAL THREAD DIAMETER0.164 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SECOND DIAMETER FROM HEAD0.139 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
SPECIAL FEATURESFURNISHED WITH WASHER ON THREADED END
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THIRD DIAMETER FROM HEAD0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM
THREAD LENGTH0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us