5310-00-558-3031 NUT,SELF-LOCKING,HEXAGON Index 5305-00-558-3038 SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-558-3037

Federal Supply Class:
5305

National Item Identification Number:
005583037

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS336-2180205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
THREAD SERIES DESIGNATORUNF
NOMINAL THREAD DIAMETER0.0375 INCHES
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.615 INCHES MINIMUM AND
0.682 INCHES MAXIMUM
FASTENER LENGTH2.187 INCHES MINIMUM AND
2.234 INCHES MAXIMUM
MATERIALSTEEL COMP 4140 OR
STEEL COMP E4340 OR
STEEL COMP 6150 OR
STEEL COMP 8735 OR
STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT COUNTERSUNK
HEAD DIAMETER0.752 INCHES MINIMUM AND
0.762 INCHES MAXIMUM
INTERNAL DRIVE STYLEHEXAGON
GRIP DIAMETER0.3737 INCHES MINIMUM AND
0.3742 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES GRIP
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.990 INCHES MINIMUM AND
2.010 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES NOMINAL FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS336 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us