5305-00-487-5246, SCREW,CLOSE TOLERANCE

5998-00-487-5245 ELECTRONIC COMPONENTS ASSEMBLY

5998-00-487-5248 ELECTRONIC COMPONENTS ASSEMBLY

National Stock Number:
5305-00-487-5246

Federal Supply Class:
5305

National Item Identification Number:
004875246

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1152C9	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1152E9	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.823 INCHES MINIMUM AND 0.853 INCHES MAXIMUM
GRIP LENGTH	0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
GRIP DIAMETER	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
HARDNESS RATING	248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER	0.280 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD LENGTH	0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNJC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial