5305-00-486-2193, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-486-2193

Federal Supply Class:
5305

National Item Identification Number:
004862193

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1154V10D

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.800 INCHES MINIMUM AND 0.850 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM
GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
HEAD DIAMETER	0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	TITANIUM ALLOY UNS R54520 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial