5306-00-476-1220 BOLT,INTERNALLY RELIEVED BODY Index 5306-00-476-1223 BOLT,SHEAR

National Stock Number:
5305-00-476-1222

Federal Supply Class:
5305

National Item Identification Number:
004761222

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
583902121GOODRICH AEROSPACE CANADA LTD.


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.070 INCHES NOMINAL FIRST HOLE
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER0.708 INCHES MINIMUM AND 0.718 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.660 INCHES MINIMUM AND 0.670 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH1.000 INCHES NOMINAL
FIRST DIAMETER FROM HEAD0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
HEAD DIAMETER0.437 INCHES NOMINAL
HEAD HEIGHT0.125 INCHES NOMINAL
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
SECOND DIAMETER FROM HEAD0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
SHANK UNTHREADED HOLE DIAMETER0.875 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENTCADMIUM HEAD
SURFACE TREATMENTCADMIUM THREADS
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.282 INCHES MINIMUM
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us