|
|
|
National Stock Number:
5305-00-450-7446
Federal Supply Class:
5305
National Item Identification Number:
004507446
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AIC79-5-15 | 06725 | SPS TECHNOLOGIES, LLC | | C079-5-15 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SFT930-5-15 | 56878 | SPS TECHNOLOGIES, LLC | | C079-5-15 | 81755 | LOCKHEED MARTIN CORPORATION | | VS2787T5C15 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.332 INCHES MINIMUM AND | | 0.399 INCHES MAXIMUM | | FASTENER LENGTH | 1.280 INCHES MINIMUM AND | | 1.327 INCHES MAXIMUM | | MATERIAL | VANADIUM ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | VANADIUM ALLOY M-A,VANADIUM ALLOYS STEEL CO MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND | | 58.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 300000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.625 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.928 INCHES MINIMUM AND | | 0.948 INCHES MAXIMUM | | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND | | 0.3117 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS |
|
|