5305-00-448-4707, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-448-4707

Federal Supply Class:
5305

National Item Identification Number:
004484707

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

MS9555-05

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.062 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.312 INCHES NOMINAL
EXTENDED WASHER THICKNESS	0.030 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM
HEAD HEIGHT	0.230 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON
INTERNAL DRIVE STYLE	W/O INTERNAL DRIVE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
WIDTH BETWEEN FLATS	0.219 INCHES NOMINAL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.346 INCHES MINIMUM AND 0.386 INCHES MAXIMUM
THREAD QUANTITY PER INCH	36
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial