5305-00-445-5316, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-445-5316

Federal Supply Class:
5305

National Item Identification Number:
004455316

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

697-1-118-2

07421

L3HARRIS INTERSTATE ELECTRONICS CORPORATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM FIRST HOLE
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.608 INCHES MINIMUM AND 0.626 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FASTENER LENGTH	0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM
HEAD DIAMETER	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
SECOND DIAMETER FROM HEAD	0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
SHANK UNTHREADED HOLE DIAMETER	0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	40

Click here to Register for Free 30-day Trial