5305-00-334-8229, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-334-8229

Federal Supply Class:
5305

National Item Identification Number:
003348229

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

752777

10001

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.063 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	0.323 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	1.000 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	4
FASTENER LENGTH	1.125 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.240 INCHES MINIMUM AND 0.261 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD	0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
HEAD DIAMETER	0.431 INCHES MINIMUM AND 0.441 INCHES MAXIMUM
HEAD HEIGHT	0.110 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SECOND DIAMETER FROM HEAD	0.280 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
SPECIAL FEATURES	STD POINT STYLE NO. 16 WITH 0.170 IN. DIA EXTENDS 0.125 IN. BEYOND THE THD END OF FASTENER
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THIRD DIAMETER FROM HEAD	0.209 INCHES MINIMUM AND 0.228 INCHES MAXIMUM
THREAD LENGTH	0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial