5305-00-298-3152, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-298-3152

Federal Supply Class:
5305

National Item Identification Number:
002983152

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

3M379-4-18	76301	THE BOEING COMPANY
69197-4-18	56878	SPS TECHNOLOGIES, LLC
HT8076-4-18	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
HT187-4-18	73197	HI-SHEAR CORPORATION
HT8076-4-18	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
HT187-4-18	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.250 INCHES
THREAD QUANTITY PER INCH	28
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.316 INCHES NOMINAL
FASTENER LENGTH	1.426 INCHES MINIMUM AND
	1.456 INCHES MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 4140 OR
	STEEL COMP 8740 OR
	STEEL COMP 8735 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.449 INCHES MINIMUM AND
	0.507 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	101.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	HIGH-TORQUE
GRIP LENGTH	1.115 INCHES MINIMUM AND
	1.135 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND
	0.2495 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES GRIP
	32.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.323 INCHES NOMINAL FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE

Click here to Register for Free 30-day Trial