|
|
|
National Stock Number:
5305-00-280-3341
Federal Supply Class:
5305
National Item Identification Number:
002803341
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT4013-4-12X | 17446 | HUCK INTERNATIONAL, INC | | HT4013-4-12X | 50394 | SPS TECHNOLOGIES INC UNBRAKO DIV | | HT4013-4-12X | 73197 | HI-SHEAR CORPORATION | | HT4013-4-12X | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4013-4-12X | 97928 | HUCK INTL INC | | HT4013-4-12X | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M605-4-12 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.378 INCHES MINIMUM AND | | 0.428 INCHES MAXIMUM | | FASTENER LENGTH | 1.138 INCHES MINIMUM AND | | 1.168 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP E4340 OR | | STEEL COMP 6150 OR | | STEEL COMP 8735 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.355 INCHES MINIMUM AND | | 0.397 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | GRIP LENGTH | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | GRIP DIAMETER | 0.2641 INCHES MINIMUM AND | | 0.2651 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS |
|
|