5305-00-274-7366, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-00-274-7366

Federal Supply Class:
5305

National Item Identification Number:
002747366

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

5305002747366	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5305002747366	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
FFS85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51108-222	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	5.072 INCHES MINIMUM AND 5.240 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	5.312 INCHES MINIMUM AND 5.500 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	1.000 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE OR 8 GRADE
SHANK UNTHREADED HOLE DIAMETER	0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT	PHOSPHATE ZINC OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.250 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	12

Click here to Register for Free 30-day Trial