5305-00-234-6199, SCREW,EXTERNALLY RELIEVED BODY

5995-00-234-6192 CABLE ASSEMBLY,POWER,ELECTRICAL

National Stock Number:
5305-00-234-6199

Federal Supply Class:
5305

National Item Identification Number:
002346199

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

5305002346199	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5305002346199	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SMB413532-1	80063	US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.343 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.562 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD HEIGHT	0.111 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE	HEXAGON
INTERNAL DRIVE STYLE	SLOT
LOCKING FEATURE	STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-3-763, COND A FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582, COND AD A ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OVERALL
SPECIAL FEATURES	HEAD FINE GRIT SAND BLAST NON-REFLECTIVE MATTE
WIDTH BETWEEN FLATS	0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD LENGTH	0.219 INCHES NOMINAL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial