5305-00-150-3264, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-150-3264

Federal Supply Class:
5305

National Item Identification Number:
001503264

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

106334-3-4D	56878	SPS TECHNOLOGIES, LLC
106334-3-4D	80539	SPS TECHNOLOGIES, LLC
202-15522-3A4	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
202-15522-3A4	17446	HUCK INTERNATIONAL, INC
202-15522-3A4	80378	TRIUMPH AEROSTRUCTURES, LLC
202-15522-3A4	97928	HUCK INTL INC
AIC83-3A4	06725	SPS TECHNOLOGIES, LLC
BA45132-3A4	17446	HUCK INTERNATIONAL, INC
VT1631-3-4T	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
BA45132-3A4	97928	HUCK INTL INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.377 INCHES MINIMUM AND 0.456 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.270 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD LENGTH	0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial