5905-00-100-6290 RESISTOR,FIXED,WIRE WOUND Index 5340-00-100-6292 CATCH,FLUSH

National Stock Number:
5305-00-100-6291

Federal Supply Class:
5305

National Item Identification Number:
001006291

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
CA2760-6029372HOWMET GLOBAL FASTENING SYSTEMS INC.


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER3.047 INCHES MINIMUM AND 3.077 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER3.436 INCHES MINIMUM AND 3.438 INCHES MAXIMUM
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY2
FASTENER LENGTH3.735 INCHES MINIMUM AND 3.765 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLETORQUE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES
SECOND DIAMETER FROM HEAD0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
SPECIAL FEATURESPLUNGER OPERATED SPRING LOADED RETAINING BALLS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us