|
|
|
National Stock Number:
5305-00-097-4441
Federal Supply Class:
5305
National Item Identification Number:
000974441
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| CA2651-4-19 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | MS21125-419 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21125-419 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.278 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | FASTENER LENGTH | 1.606 INCHES MINIMUM AND | | 1.626 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 SPRING | | IRON ALLOY 660 FASTENER | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.477 INCHES MINIMUM AND | | 0.492 INCHES MAXIMUM | | HEAD HEIGHT | 0.126 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | LOCKING FEATURE | DETENT BALL GRIP | | GRIP LENGTH | 1.188 INCHES MINIMUM AND | | 1.203 INCHES MAXIMUM | | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND | | 0.2492 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.511 INCHES MINIMUM AND | | 1.531 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM FIRST HOLE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|