| MATERIAL | STEEL COMP 304 BODY |
| PLASTIC POLYAMIDE FLOW CONTROL DEVICE |
| RUBBER SYNTHETIC PACKING |
| NICKEL ALLOY SEAT |
| STEEL COMP 316 STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-351, CF-8 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| P-3086 PLASTIC POLYAMIDE (NYLON) MIL SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MIL-R-83248 TY. 1 CL. 2 (VITON) MIL SPEC SINGLE MATERIAL RESPONSE PACKING |
| ASTM-B-164 (MONEL) ASSN STD SINGLE MATERIAL RESPONSE SEAT |
| ASTM-A-276 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| STYLE DESIGNATOR | ANGLE |
| FLOW CONTROL DEVICE | DISK |
| MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 225.0 DEG FAHRENHEIT SINGLE RESPONSE |
| VALVE OPERATION METHOD | MANUAL |
| CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| CONNECTION STYLE | SOCKET 1ST END |
| EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.555 INCHES 1ST END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 18 2ND END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | THREADED |
| FURNISHED ITEMS AND QUANTITY | 1 HANDWHEEL AND |
| 2 TAILPIECE |
| MINIMUM OPERATING TEMP | -20.0 DEG FAHRENHEIT |
| SPECIAL FEATURES | ANGLE, SHUTOFF VALVE WITH FITTINGS. RECOMMENDED FOR WATER, OIL, OR GAS SERVICE. THIS VALVE H.P. HYDRAULIC AND PNEUMATIC. |
| TEST DATA DOCUMENT | 81349-MIL-S-901D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-V-24109A GOVERNMENT SPECIFICATION |
| NONDEFINITIVE SPEC/STD DATA | 381-1-VA ASSEMBLY |
| DEPARTURE FROM CITED DOCUMENT | MODIFIED WITH TAILPIECES AND UNION NUTS. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | .250 ANGLE SHUTOFF VALVE, 6000 P.S.I. (414 BARS), CAT. 381-1-VA. |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-V-24109 |