|
|
|
National Stock Number:
4820-01-406-8875
Federal Supply Class:
4820
National Item Identification Number:
014068875
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| M3171-2039 | 0ASY6 | DERBYSHIRE MARINE PRODUCTS, LLC |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | UNION | | CONNECTION STYLE | FLARELESS (TUBE) ALL ENDS | | CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS | | FLOW CONTROL DEVICE | STEM | | OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STEM | | MATERIAL | STEEL COMP 316 BODY | | MATERIAL | STEEL COMP 316 STEM | | MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MOUNTING FACILITY | PANEL | | NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS | | SEAT ANGLE | 24.0 DEGREES ALL ENDS | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3A ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) ALL ENDS | | THREAD QUANTITY PER INCH | 16 ALL ENDS |
|
|