|
|
|
National Stock Number:
4820-01-298-4355
Federal Supply Class:
4820
National Item Identification Number:
012984355
Description:
VALVE,SAFETY RELIEF
Detail:
A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.
|
Manufacturer Information:
| 515-42 | 28953 | RIX INDUSTRIES | | 5177A-4TB-100 | 91816 | CIRCOR AEROSPACE, INC. | | D952 PIECE 61 | 28953 | RIX INDUSTRIES |
|
Techincal Specification:
| STYLE DESIGNATOR | STRAIGHT THRU NOTE: TO BE USED FOR VALVE BODIES OF ONE SECTION ONLY. | | VALVE OPERATION METHOD | AUTOMATIC | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | FLOW CONTROL DEVICE | POPPET | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | HYDRAULIC FLUID, MINERAL BASE 2ND RESPONSE | | WATER, FRESH 3RD RESPONSE | | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 275.0 DEG FAHRENHEIT SINGLE RESPONSE | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNJF 1ST END | | UNF 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | OPENING PRESSURE SETTING | 100.0 POUNDS PER SQUARE INCH |
|
|