|
|
|
National Stock Number:
4820-01-281-0957
Federal Supply Class:
4820
National Item Identification Number:
012810957
Description:
VALVE,Y
Detail:
A VALVE WITH ONE INLET AND ONE OUTLET CONNECTION THAT PROVIDES UNOBSTRUCTED FLUID FLOW. THE FLOW IS CONTROLLED BY THE ACTION OF A STEM WHICH LIFTS DISK PERPENDICULARLY OFF CENTER AXIS OF ITS SEAT. THE STEM IS AT ANGLE OF LESS THAN 90 DEGREES (1.5708 RADIANS) TO PARALLEL INLET AND OUTLET FLOW. IT MAY UTILIZE A DIAPHRAGM AS PACKING. EXCLUDES VALVE, STOP-CHECK.
|
Manufacturer Information:
| 225T 1IN | 14652 | UNITED BRASS WORKS, INC. | | 225T-1.0IN | 14652 | UNITED BRASS WORKS, INC. |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE | | OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE FLOW CONTROL DEVICE | | MEDIA FOR WHICH DESIGNED | STEAM FIRST RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SECOND RESPONSE | | NOMINAL THREAD SIZE | 1.000 INCHES ALL ENDS | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | STRAIGHT THRU Y-PATTERN | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS |
|
|