|
|
|
National Stock Number:
4820-01-260-6971
Federal Supply Class:
4820
National Item Identification Number:
012606971
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 05476200 | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV | | 05476200 | 30327 | IMPERIAL | | 54762 | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV | | 54762 | 30327 | IMPERIAL |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARELESS (TUBE) 1ST END | | CONNECTION STYLE | GASKET SEAL(BOSS) 2ND END | | FLOW CONTROL DEVICE | STEM | | MATERIAL | STEEL CORROSION RESISTING BODY | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING TEMP | 200.0 DEG FAHRENHEIT SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL THREAD SIZE | 0.438 INCHES ALL ENDS | | SEAT ANGLE | 12.0 DEGREES 1ST END | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | STRAIGHT THRU | | THREAD CLASS | 3A 1ST END | | THREAD CLASS | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | THREAD SERIES DESIGNATOR | UNJ 1ST END |
|
|