|
|
|
National Stock Number:
4820-01-113-4541
Federal Supply Class:
4820
National Item Identification Number:
011134541
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| A-15525 | 41947 | MUELLER BRASS | | MMP91725 | 90598 | ENGINEERED AIR SYSTEMS INC. DBA DRS SUSTAINMENT SYSTEMS | | MMP91725-1 | 90598 | ENGINEERED AIR SYSTEMS INC. DBA DRS SUSTAINMENT SYSTEMS |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | PLASTIC SEAT | | STEEL CORROSION RESISTING STEM | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | DIAPHRAGM | | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 200.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | PLAIN (PIPE) 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNJF 1ST END | | NPT 2ND END | | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END | | 0.250 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | SPECIAL FEATURES | SUITABLE FOR REFRIGERANT AND OTHER HAZARDOUS OR EXPENSIVE INDUSTRIAL FLUIDS NON-CORROSIVE TO BRASS AND STAINLESS STEEL |
|
|