|
|
|
National Stock Number:
4820-01-075-6203
Federal Supply Class:
4820
National Item Identification Number:
010756203
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 2755 | 27783 | SCHRADER-BRIDGEPORT INTERNATIONAL INC DBA SCHRADER AUTOMOTIVE | | 9112099 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | STEEL COMP 1117 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE BODY | | 66 FED STD SINGLE MATERIAL RESPONSE STEM | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE | | WATER-OIL-GAS 2ND RESPONSE | | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH 1ST RESPONSE | | 1500.0 POUNDS PER SQUARE INCH 2ND RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED INTERNAL BOSS 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | GASKET SEAL(BOSS) 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | UNEF 2ND END | | NOMINAL THREAD SIZE | 0.375 INCHES 1ST END | | 0.312 INCHES 2ND END | | THREAD CLASS | 3A 1ST END | | 3B 2ND END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 9112099 |
|
|