|
|
|
National Stock Number:
4820-01-021-9239
Federal Supply Class:
4820
National Item Identification Number:
010219239
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 4820PL0990300 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5MH120-434ITEM6 | 10855 | CARRIER CORP | | 90C01-4622 | 10855 | CARRIER CORP | | M585-ZNNC | 28193 | HENRY TECHNOLOGIES, INC. | | M585-ZT | 28193 | HENRY TECHNOLOGIES, INC. | | SK5166-N | 28193 | HENRY TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | IRON CAST BODY | | IRON ALLOY FLOW CONTROL DEVICE | | PLASTIC POLYAMIDE SEAT | | STEEL STEM | | SURFACE TREATMENT | PAINT | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | DISK | | MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 275.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | AUTOMATIC | | CONNECTION TYPE | FLANGE 1ST END | | BUTT WELD PIPE 2ND END | | CONNECTION STYLE | BEVELED (PIPE) 2ND END | | FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END | | RECTANGULAR WITH HOLES 2ND END | | NOMINAL THICKNESS | 2.062 INCHES 1ST END | | NOMINAL LENGTH | 6.500 INCHES 1ST END | | NOMINAL WIDTH | 6.500 INCHES 1ST END | | BOLT HOLE QUANTITY | 4 1ST END | | BOLT HOLE NOMINAL DIAMETER | 0.312 INCHES 1ST END | | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.812 INCHES 1ST END | | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 4.812 INCHES 1ST END | | FLANGE FACE DESIGN | PLAIN 1ST END | | NOMINAL PIPE SIZE ACCOMMODATED | 4.000 INCHES 2ND END | | BONNET TYPE | INSIDE SPRING | | BONNET ATTACHMENT METHOD | BOLTED | | SPECIAL FEATURES | WITHOUT 1/4 IN. PIPE PLUG |
|
|