|
|
|
National Stock Number:
4820-00-953-5684
Federal Supply Class:
4820
National Item Identification Number:
009535684
Description:
VALVE,LIFT-CHECK
Detail:
A VALVE WITH A STEM THAT MAY BE MECHANICALLY ACTUATED TO TWO DIFFERENT POSITIONS BY ROTARY OR LINEAR MOTION. IN THE FIRST POSITION, ONE SIDE OF THE VALVE DISK IS LOCATED AGAINST THE SEAT PERMITTING MOVEMENT OF THE DISK IN A MANNER THAT WILL ALLOW A FLOW OF FLUID IN ONE DIRECTION THROUGH THE VALVE. IN THE SECOND POSITION, THE VALVE DISK IS LIFTED FROM THE SEAT TO ALLOW A FLOW OF FLUID IN EITHER DIRECTION THROUGH THE VALVE. THE VALVE DISK MAY BE SPRING LOADED. SEE ALSO VALVE, STOP-CHECK AND VALVE, STOP-LIFT-CHECK.
|
Manufacturer Information:
| 32-41106-302 | 76301 | THE BOEING COMPANY | | 32-691550-20 | 76301 | THE BOEING COMPANY | | 5905-2 | 57817 | TACTAIR FLUID CONTROLS INC PHOENIX CONTROLS DIV | | 5905-2 | 70236 | TACTAIR FLUID CONTROLS INC |
|
Techincal Specification:
| SURFACE TREATMENT | ANODIZE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL STD SINGLE TREATMENT RESPONSE | | STYLE DESIGNATOR | STRAIGHT THRU | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PETROLEUM BASE SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END | | CONNECTION STYLE | GASKET SEAL (BOSS) 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NOMINAL THREAD SIZE | 0.437 INCHES 1ST END | | THREAD QUANTITY PER INCH | 20 1ST END | | THREAD CLASS | 3B 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | MOUNTING POSITION | HORIZONTAL OR | | VERTICAL | | BONNET TYPE | INSIDE SPRING | | BONNET ATTACHMENT METHOD | THREADED | | DISK LOADING METHOD | SPRING | | FEATURES PROVIDED | VALVE STEM LOCK SHIELD AND | | BONNET PACKING | | SPECIAL FEATURES | 74.0 DEG OPERATING RANGE | | TEST DATA DOCUMENT | 76301-32-691550 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 76301 | | DESIGN CONTROL REFERENCE | 32-691550-20 |
|
|