| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| STEEL CORROSION RESISTING SEAT |
| STEEL CORROSION RESISTING STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| 66 FED STD SINGLE MATERIAL RESPONSE AND |
| AISI 302/SAE 30302 ASSN STD SINGLE MATERIAL RESPONSE SEAT |
| 66 FED STD 1ST MATERIAL RESPONSE AND |
| AISI 302/SAE 30302 ASSN STD 2ND MATERIAL RESPONSE STEM |
| SURFACE TREATMENT | ENAMEL |
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | POPPET |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 3000.0 DEG FAHRENHEIT SINGLE RESPONSE |
| VALVE OPERATION METHOD | AUTOMATIC |
| CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | FLARE (TUBE) ALL ENDS |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES ALL ENDS |
| THREAD SERIES DESIGNATOR | UNF ALL ENDS |
| NOMINAL THREAD SIZE | 0.437 INCHES ALL ENDS |
| THREAD CLASS | 3B ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| MOUNTING POSITION | HORIZONTAL |
| RENEWABLE SEAT RING TYPE | PRESSED-IN |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | PRESSURE SEAL, RING TYPE |
| DISK LOADING METHOD | SPRING |
| MOUNTING FACILITY | THREADED FASTENER |
| FEATURES PROVIDED | VALVE STEM LOCK SHIELD |
| TEST DATA DOCUMENT | 70236-T1175 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |