|
|
|
National Stock Number:
4820-00-915-4201
Federal Supply Class:
4820
National Item Identification Number:
009154201
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 51510 ITEM 7 | 57574 | VELAN VALVE CORP. | | MILV22094 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILV22094L1 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | W5-275B-5TS L1 | 57574 | VELAN VALVE CORP. |
|
Techincal Specification:
| MATERIAL | STEEL BODY | | STEEL FLOW CONTROL DEVICE | | ASBESTOS PACKING | | COBALT ALLOY SEAT | | STEEL STEM | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 975.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | UNTHREADED INTERNAL PIPE 1ST END | | CONNECTION STYLE | SOCKET 1ST END | | NOMINAL PIPE SIZE ACCOMMODATED | 1.000 INCHES 1ST END | | RENEWABLE SEAT RING TYPE | WELDED | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | BOLTED | | FEATURES PROVIDED | BONNET PACKING | | TEST DATA DOCUMENT | 81349-MIL-V-22094 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | NONDEFINITIVE SPEC/STD DATA | B COMPOSITION | | DEPARTURE FROM CITED DESIGNATOR | QUALITY ASSURANCE TESTING IN ACCORDANCE WITH NAVY LEVEL1 ASSURANCE GUIDE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILV22094 |
|
|