|
|
|
National Stock Number:
4820-00-905-3484
Federal Supply Class:
4820
National Item Identification Number:
009053484
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | FLARED (TUBE) FIRST END | | CONNECTION STYLE | PLAIN (PIPE) SECOND END | | CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE FIRST END | | FLOW CONTROL DEVICE | DISK | | OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | COPPER ALLOY AND PLASTIC POLYAMIDE NYLON FLOW CONTROL DEVICE | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | COPPER ALLOY STEM | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES FIRST END | | NOMINAL THREAD SIZE | 0.500 INCHES SECOND END | | NOMINAL THREAD SIZE | 0.750 INCHES FIRST END | | SEAT ANGLE | 45.0 DEGREES FIRST END | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | ANGLE | | THREAD CLASS | 3A FIRST END | | THREAD DIRECTION | RIGHT-HAND FIRST END | | THREAD DIRECTION | RIGHT-HAND SECOND END | | THREAD SERIES DESIGNATOR | NPTF SECOND END | | THREAD SERIES DESIGNATOR | UNF FIRST END | | THREAD QUANTITY PER INCH | 14 SECOND END |
|
|