|
|
|
National Stock Number:
4820-00-905-3301
Federal Supply Class:
4820
National Item Identification Number:
009053301
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 114-4B | 58553 | SUPERIOR VALVE CO | | A15741 | 41947 | MUELLER BRASS | | EP20LA093 | 10855 | CARRIER CORP |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | COPPER ALLOY AND | | PLASTIC POLYAMIDE FLOW CONTROL DEVICE | | COPPER ALLOY SEAT | | COPPER ALLOY STEM | | STYLE DESIGNATOR | ANGLE | | FLOW CONTROL DEVICE | DISK | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | THREADED EXTERNAL PIPE 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | PLAIN (PIPE) 2ND END | | SEAT ANGLE | 45.0 DEGREES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | NPT 2ND END | | NOMINAL THREAD SIZE | 0.437 INCHES 1ST END | | 0.250 INCHES 2ND END | | THREAD QUANTITY PER INCH | 18 2ND END | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | RIGHT-HAND 2ND END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 58553 | | DESIGN CONTROL REFERENCE | 114-4B |
|
|