|
|
|
National Stock Number:
4820-00-812-5685
Federal Supply Class:
4820
National Item Identification Number:
008125685
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| SSNG250-2P | 62073 | DYNATECH FRONTIER CORP SUB OF DYNATECH CORP |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING BODY | | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | PLASTIC POLYAMIDE SEAT | | STEEL CORROSION RESISTING STEM | | STYLE DESIGNATOR | STRAIGHT THRU | | FLOW CONTROL DEVICE | NEEDLE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | MAXIMUM OPERATING PRESSURE | 6000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | VALVE OPERATION METHOD | MANUAL | | CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END | | NOMINAL PIPE SIZE ACCOMMODATED | 0.250 INCHES 1ST END | | THREAD SERIES DESIGNATOR | NPT 1ST END | | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 62073 | | DESIGN CONTROL REFERENCE | SSNG250-2P |
|
|