| STYLE DESIGNATOR | STRAIGHT THRU |
| VALVE OPERATION METHOD | AUTOMATIC |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| ALUMINUM ALLOY 2024 SEAT |
| ALUMINUM ALLOY 2024 STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE SEAT |
| QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| SURFACE TREATMENT | ANODIZE |
| FLOW CONTROL DEVICE | POPPET |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| VALVE DISCHARGE FLOW RATE | 20.0 GALLONS PER MINUTE |
| CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END |
| CONNECTION STYLE | GASKET SEAL(BOSS) 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | INTEGRAL |
| DISK LOADING METHOD | SPRING |
| OPENING PRESSURE SETTING | 3000.0 POUNDS PER SQUARE INCH |
| ADJUSTABLE PRESSURE RANGE | 26.0 TO 35.0 POUNDS PER SQUARE INCH |
| FEATURES PROVIDED | VALVE STEM LOCK SHIELD AND |
| BONNET PACKING AND |
| PRESSURE TIGHT OUTLET SIDE |
| TEST DATA DOCUMENT | 00502-314500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |