| STYLE DESIGNATOR | STRAIGHT THRU |
| MATERIAL | ALUMINUM ALLOY BODY |
| ALUMINUM ALLOY SEAT |
| SURFACE TREATMENT | ANODIZE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 75.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| VALVE DISCHARGE FLOW RATE | 4.0 GALLONS PER MINUTE |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | FLARELESS (TUBE) 1ST END |
| SEAT ANGLE | 12.0 DEGREES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 3A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| DISK LOADING METHOD | SPRING |
| OPENING PRESSURE SETTING | 59.0 POUNDS PER SQUARE INCH |
| ADJUSTABLE PRESSURE RANGE | 66.0 TO 70.0 POUNDS PER SQUARE INCH |
| FEATURES PROVIDED | VALVE STEM LOCK SHIELD AND |
| PRESSURE TIGHT OUTLET SIDE |
| TEST DATA DOCUMENT | 36659-668413 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 91816 |
| DESIGN CONTROL REFERENCE | P30-220 |