| MATERIAL | ALUMINUM ALLOY BODY |
| STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| RUBBER SYNTHETIC SEAT |
| SURFACE TREATMENT | ANODIZE |
| STYLE DESIGNATOR | TEE |
| FLOW CONTROL DEVICE | DISK |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT 1ST RESPONSE |
| 160.0 DEG FAHRENHEIT 2ND RESPONSE |
| VALVE OPERATION METHOD | AUTOMATIC |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| THREADED INTERNAL BOSS 2ND END |
| THREADED INTERNAL BOSS 3RD END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| GASKET SEAL (BOSS) 2ND END |
| GASKET SEAL (BOSS) 3RD END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END |
| 0.250 INCHES 2ND END |
| 0.250 INCHES 3RD END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| UNJ 2ND END |
| UNJF 3RD END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| 1.312 INCHES 2ND END |
| 1.312 INCHES 3RD END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| 12 3RD END |
| THREAD CLASS | 3A 1ST END |
| 3B 2ND END |
| 3B 3RD END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| RIGHT-HAND 3RD END |
| MOUNTING POSITION | HORIZONTAL OR |
| VERTICAL |
| DISK LOADING METHOD | SPRING |
| SPECIAL FEATURES | THIRD END THD INTERNAL BOSS PERMS33649-4 90 DEG FROM OUTLET |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 3H889 |
| DESIGN CONTROL REFERENCE | F61A0229 |