|
|
|
National Stock Number:
4820-00-585-8233
Federal Supply Class:
4820
National Item Identification Number:
005858233
Description:
VALVE,GLOBE
Detail:
A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
|
Manufacturer Information:
| 4009-4 | 82386 | JAIDINGER MANUFACTURING CO INC |
|
Techincal Specification:
| BONNET TYPE | INSIDE SCREW | | BONNET ATTACHMENT METHOD | THREADED | | CONNECTION STYLE | GASKET SEAL(BOSS) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL BOSS ALL ENDS | | FLOW CONTROL DEVICE | NEEDLE | | OPERATING PRESSURE | 10000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE | | MATERIAL | STEEL OR COPPER ALLOY BODY | | MATERIAL | STEEL OR COPPER ALLOY FLOW CONTROL DEVICE | | MATERIAL | STEEL SEAT | | MATERIAL | STEEL STEM | | MAXIMUM OPERATING TEMP | 160.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | OIL SECOND RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS FIRST RESPONSE | | NOMINAL THREAD SIZE | 0.437 INCHES ALL ENDS | | SPECIAL FEATURES | W/YELLOW PLASTIC MANUAL CROSS TYPE HANDLE AT TOP OF VALVE | | VALVE OPERATION METHOD | MANUAL | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT | ZINC | | THREAD CLASS | 3B ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS |
|
|