| STYLE DESIGNATOR | ANGLE |
| VALVE OPERATION METHOD | AUTOMATIC |
| MATERIAL | COPPER ALLOY BODY |
| STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| STEEL CORROSION RESISTING SEAT |
| FLOW CONTROL DEVICE | DISK |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 1750.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END |
| PLAIN (PIPE) 2ND END |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.500 INCHES 1ST END |
| 0.500 INCHES 2ND END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| NPT 2ND END |
| NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| 0.500 INCHES 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| BONNET TYPE | INSIDE SPRING |
| BONNET ATTACHMENT METHOD | INTEGRAL |
| OPENING PRESSURE SETTING | 150.0 POUNDS PER SQUARE INCH |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| SPECIAL FEATURES | THE END IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |